• Lighting India
  • Dec 20, 2016

We are aware that an LED lamp is more efficient at low power level. It means that instead of using 6W LED single lamp, we can use 3 lamps of each 2W or two lamps of each 3W rating. In this fashion of LED lamp distribution in a given room will provide is a comparatively uniform illumination in given room surface...

  • Lighting India
  • Oct 20, 2016

LED lighting is the best choice to reduce energy consumption. It uses only 20% energy than an equivalent incandescent lamp. It also liberates much less heat than an incandescent bulb which in turn reduces the heat load on air conditioning...

  • Lighting India
  • Oct 20, 2016

In this article, the authors have explained the energy saving at source energy vs site energy and payback period using the new lightning scheme (LEDs) against the old four feet long fluorescent tubes (FTL). We have also done one case study with calculation to explain the advantages of LEDs lightning scheme. At the end of article, the authors have discussed the comparison between FTLs versus LEDs...

  • Lighting India
  • Sep 20, 2016

Colorado Leaf finds up to 60% less power use than they had expected based on comparisons with other kinds of lighting...

  • Lighting India
  • Dec 20, 2015

As opposed to the traditional approach, wherein a customer demands specific wattages from manufacturers, in a design-based approach, the customer demands light i.e., Lux Levels. Eventually, from a lighting product, what matters is light and not watts...

  • Lighting India
  • Dec 20, 2015

After a successful deployment at two locations, the bank is now seeking to use Redwood for applications beyond lighting control...

  • Lighting India
  • Jun 20, 2015

There is a great potential for saving electricity through the use of advanced lighting design practices and control strategies. Such practices will reduce the emission of green house gases associated with electricity production...

  • Lighting India
  • Apr 20, 2015

The author expresses his opinion on what all should be considered for energy saving change over using LEDs in Road Lighting.